add share buttons

Port Aid History

New Challenge for New World

Tag: Millefiore

How To Create Glass Beam Lights?

All that you need to start a craft project is practice, patience, and knowing a few tips and tricks that can save your time and money.

First, you need a drill or press. Then use a 1/2 "diamond drill and place the block on a hard surface! If you are looking for creative glass paradise then you can browse www.artglasssupplies.com/fused-glass-flowers-molds-book-by-creative-paradise.

Image result for How To Create Glass Beam Lights?

Image Source – Google

Use water as a lubricant (or certain oils or even edible oil!) It is a wise precaution to wear safety equipment: glasses to protect the eyes, ear protection and also a breathing mask to avoid breathing glass dust.

You might need to practice with a drill. Remember to be very patient, use the drill very slowly and without putting much pressure. One of the main problems after making a hole in glass dust that tends to remain inside the block.

There are many ways you can use to remove it, but it is best to wash the block with warm water (without soap) immediately after the hole is made. Rinse the block carefully and let it dry for several days.

Now the creative part of the work can begin: One of the simplest but most effective ideas is to wrap a beautiful ribbon around it and make a beautiful big bow at the top of the glass beam. If this is what you are looking for, put lights inside the block.

Know About Steps of Glass Painting

Basic Steps for Making Glass Painting:

1. After getting the glass pieces and painting kit, clean the glass to get a smooth surface.

2. If your oven won't cure your finished painting then you need a rather rough surface. Burning in the kiln can help the oil paint dry and stick better because the paint tends to peel or break.

This can be overcome by slightly drying the surface with wet or dry sandpaper. Changing the surface in this way will help the paint to stick better and last longer. You can checkout glassline metallic copper fusing paint online.

Image result for Know About Steps of Glass Painting

Image Source – Google

3. Choose patterns that have clear outlines with minimum curves and sharp angles.

4. Trace the pattern on a sheet of paper that is exactly the size of the piece of glass. The pattern should be drawn right in the middle with at least 1 or 1-1 /2-inch margins on all sides.

5. Store the glass on a patterned paper that is in perfect harmony.

6. Make pattern lines on the glass with the help of a glass liner. Use a black glass liner for maximum clarity. This border helps to retain the wet colours in it and avoid paint spills.

7. When doing all this, be careful not to mess up the pattern. However, if that happens, wipe the dirty part with a cotton swab dipped in a nail polish remover and wipe with a piece of cloth.